DCbox DC5-A Manuel

Ölçüm Cihazları DCbox DC5-A için çevrimiçi göz atın veya pdf Manuel indirin. DCbox DC5-A 2 sayfaları. 5 digital micro-process meter

Sayfayı Yazdır
DC5-A
D
Please understand key indicators & functions at the first operation.
Display 1 Indicator
Display 2 Indicator
Root Indicator
Symbol
Key Name
Z
Reset Key
Enter Key &
ENT
Save Key
Shift Key
AL
Up Key & Display
Span Adjusting Key
Down Key & Display
Zero Adjusting Key
**1. The following block charts are parameters codes, parameter codes & parameters will alternate flashing
if the parameters can be modified.
2. To modify the parameters, please press
3. Please don't forget the new pass code after modification.
4. In any pages, press
Block Charts
Power On
Measuring Status
Press
for 3 sec
Displ ay Span
Adjust ment (dSPAn)
ENT
Press
Measuring Status Present value for measurement.
Press
for 3 sec
Display (dZEro)
Adjustment (dZEro)
ENT
Press
5 DIGITAL MICRO-PROCESS METER
FRONT PANEL & KEY FUNCTIONS
None
AL1
AL2
AL3
AL4
AZ
Reset Key
Enter Key &
Save Key
1. Press this key to enable the reset function & reset indicator (Z) is light; press this key again to
disable the reset function & reset indicator (Z) is dark.
1. In the measuring
2. In the parameter setting, press this key can save the value & go to next parameter.
1. In the parameter setting , press this key can move the cursor left.
1.In the measuring
status,
2. In the parameter setting, press this key can increase the digits.
1.In the measuring
status,
2. In the parameter setting , press this key can decrease the digits.
AL
& , or don't press any keys for 2 minutes that will back to measuring status.
GENERAL MODE OPERATING PROCEDURES
Display
Present value for measurement.
Press
to select adjusting speed rate, press
AL
PS: To use this function to adjust the real span value.
Press
to select adjusting speed rate, press
AL
PS: To use this function to adjust the real zero value.
Shift Key
Up Key & Display
Span Adjusting Key
Descriptions
press this key can enter to parameter pages.
status,
press this key for 3 sec can enter to display value adjustment of "SPAN"
press this key for 3 sec can enter to display value adjustment of "ZERO"
, and press ENT to save the parameters after the modification.
Descriptions
Display: SPAN Adjustment
Display: ZERO Adjustment
P1
Reset Indicator
AZ
Max. Hold Indicator
MAX
Data Hold Indicator
HD
Expand Function
DIO
Down Key & Display
Zero Adjusting Key
to modify the span value.
to modify the zero value.
MANUAL
Default