Autopilot APCECOD Manuel - Sayfa 7

Kontrolör Autopilot APCECOD için çevrimiçi göz atın veya pdf Manuel indirin. Autopilot APCECOD 17 sayfaları. Deluxe digital co2 controller

Page 6

APCECOD

How to customize settings...

Up - Press button to increase setting

Down - Press button to decrease setting

Enter/reset – The Enter / reset button is used to accept new

settings and to reset some errors.

CO2 PPM setting - Press CO2 PPM, The current PPM setting

will be displayed. To change settings press the Up or Down

buttons. Press Enter to accept new setting.

CO2 Dead-band setting - Press CO2 Dead-band. The current

CO2 dead-band setting is displayed. To change settings press

the Up or Down buttons. Press Enter to accept new setting.

CO2 Function setting - Press CO2 Function, The photocell

setting will be displayed (Day-Night or 24 hours). To change

settings press the Up or Down buttons. Press Enter to accept new

setting.

CO2 Mode setting - Press CO2 Mode, The current CO2 mode

will be displayed (Increase or Decrease). To change settings

press the Up or Down buttons. Press Enter to accept new setting.

Min/Max Recall - Press to "recall" or display the minimum and

maximum CO2 recorded values. Each time the button is pressed,

the next setting will be displayed.

Note: To reset the Min / Max values – When the

recorded value is displayed, press the Enter / Reset

button. Pressing repeatedly will reset each value

sequentially.