Autopilot APCECOD Manuel - Sayfa 8

Kontrolör Autopilot APCECOD için çevrimiçi göz atın veya pdf Manuel indirin. Autopilot APCECOD 17 sayfaları. Deluxe digital co2 controller

Page 7

APCECOD

Photocell Sensitivity

The sensitivity of the photocell may be adjusted.

* Press the Down button and hold for 3 seconds. The current

photocell setting will be displayed.

* Press Up to increase the number displayed and the sensitivity.

(requires less light to activate photocell)

* Press Down to decrease the number and the sensitivity.

(requires more light to activate photocell)

Fuzzy Logic CO2 mode

"Fuzzy Logic" CO2 mode allows the user to more precisely

control the CO2 levels inside the growing area. Fuzzy Logic

works by monitoring the rising or falling CO2 level and reacting to

it by quickly activating ON / OFF the CO2 solenoid valve. This

function can ONLY be used with compressed CO2.

Fuzzy Logic mode can be activated or deactivated by pressing

the Fuzzy Logic button. Press Up or Down to select generator

mode (gEnErAt) if using CO2 generator or Fuzzy logic mode

(LogIcon) if using compressed CO2. Press Enter to accept new

setting.

Note* To prevent the CO2 regulator from "freezing" or not closing

when using the "fuzzy logic" mode, we recommend using the

CO2 regulator designed to work with the controllers.

Note: Do not use Fuzzy logic mode if operating a CO2

generator!!!