Gallagher T11 Kurulum Notu

Kart Okuyucu Gallagher T11 için çevrimiçi göz atın veya pdf Kurulum Notu indirin. Gallagher T11 11 sayfaları.
Ayrıca Gallagher T11 için: Kurulum Notu (11 sayfalar), Kurulum Notu (13 sayfalar)

Sayfayı Yazdır
Gallagher T11 Kurulum Notu
Installation Note
Gallagher T11 Reader
This equipment contains components that can be damaged by electrostatic
discharge. Ensure both you and the equipment are earthed before beginning
any servicing.
The Gallagher T11 Reader
The Gallagher T11 Reader is a smart card proximity reader. It can be installed as
either an entry reader or exit reader. It can be mounted on any standard electrical
flush (gang) box, used in New Zealand, Australia, USA and Canada.
The reader can read Mifare DESFire EV1, Mifare Plus and Mifare Classic cards. The
Multi Tech variant can also read 125Khz cards.
The reader sends information to the Cardax FT Controller and acts upon information
sent from the Cardax FT Controller. The reader itself does not make any access
decisions.
The Gallagher T11 Reader uses the "Cardax IV Reader" communications protocol
to communicate with the Cardax FT Controller.
Installation Note | Gallagher T11 Reader
Part Number: 3E2513 R1 | 1