Gallagher T11 Вказівки щодо встановлення

Переглянути онлайн або завантажити pdf Вказівки щодо встановлення для Зчитувач карток Gallagher T11. Gallagher T11 11 сторінок.
Також для Gallagher T11: Вказівки щодо встановлення (11 сторінок), Вказівки щодо встановлення (13 сторінок)

Installation Note

Gallagher T11 Reader

This equipment contains components that can be damaged by electrostatic

discharge. Ensure both you and the equipment are earthed before beginning

any servicing.

The Gallagher T11 Reader

The Gallagher T11 Reader is a smart card proximity reader. It can be installed as

either an entry reader or exit reader. It can be mounted on any standard electrical

flush (gang) box, used in New Zealand, Australia, USA and Canada.

The reader can read Mifare DESFire EV1, Mifare Plus and Mifare Classic cards. The

Multi Tech variant can also read 125Khz cards.

The reader sends information to the Cardax FT Controller and acts upon information

sent from the Cardax FT Controller. The reader itself does not make any access

decisions.

The Gallagher T11 Reader uses the "Cardax IV Reader" communications protocol

to communicate with the Cardax FT Controller.

Installation Note | Gallagher T11 Reader

Part Number: 3E2513 R1 | 1