Highland 5801200 Manuel

Otomobil Aksesuarları Highland 5801200 için çevrimiçi göz atın veya pdf Manuel indirin. Highland 5801200 12 sayfaları. 2-bike carrier

ASSEMBLY INSTRUCTIONS:

Insert Bike Carrier Shank into vehicle's hitch receiver,

lining up pin holes, and secure with 1/2" Pin and Clip

supplied. Figure 1.

For use on 2" receiver hitches, attach the 1-1/4" to 2"

adapter – See shank adapter instructions.

Place Main Support Tube onto Bike Carrier Shank,

and fasten to Bracket using four (4) 5/16" carriage

bolts and lock nuts supplied.

Slide the Arm Supports onto the Main Support Tube

and secure with the two (2) bail safety pins.

Figure 2.

Note: Lower Hook faces vehicle, upper Hook faces

rearward.

Slide Wheel Hook Assemblies onto arm supports as

shown – two hooks facing vehicle and two hooks

facing rearward. Leave hooks loose at this step.

Note: The Wheel hooks must be installed so that the

Hook is in a vertical position as shown in Figure 3.

Description:

WHEEL HOOK ASSEMBLY (4)

ARM SUPPORT (2)

BAIL SAFETY PIN (2)

FIGURE 2

5801200

Item:

2-Bike Carrier

5/16" x 1.00

CARRIAGE BOLT

5/16" LOCK NUT

(4) PLACES

½" PIN

½" PIN CLIP

SHANK

MAIN SUPPORT TUBE

FIGURE 1

UPPER HOOK

LOWER HOOK

WHEEL HOOK

SHOWN IN PROPER

ORIENTATION

FIGURE 3