Highland 5801200 Manuel - Sayfa 3

Otomobil Aksesuarları Highland 5801200 için çevrimiçi göz atın veya pdf Manuel indirin. Highland 5801200 12 sayfaları. 2-bike carrier

Sayfayı Yazdır
1-1/4" to 2" Shank Adapter Insert Instructions
4
3
1
Qty. (2)
Angle Bracket
2
Qty. (1)
Socket Cap Screw, 10mm x 70mm CL8.8
3
Qty. (1)
Hex Lock Nut, M10 x 1.50

IMPORTANT NOTES:

• Save hexagon key wrench and keep in a safe place.
• Periodically check and re-tighten bolts.
1.
PLACE ANGLES AROUND SHANK, ALIGN HOLES IN ANGLES WITH HOLE IN SHANK, AS SHOWN.
2.
HOLD SHANK AND ANGLES FIRMLY TOGETHER AND INSERT INTO RECEIVER. ALIGN HOLES IN
ANGLES AND SHANK WITH HOLES IN RECEIVER.
3.
INSERT SOCKET HEAD CAP SCREW THROUGH RECEIVER, ANGLES AND SHANK SO THAT HEAD OF
SCREW IS RECESSED IN DRAWBAR PIN HOLE ON RECEIVER AS SHOWN IN FIGURE 8.
(SCREW MAY BE INSTALLED FROM EITHER SIDE OF RECEIVER)
4.
ASSEMBLE FLAT WASHER AND LOCKNUT ONTO SCREW. TIGHTEN NUT WITH SOCKET WRENCH
WHILE HOLDING SCREW WITH HEXAGON KEY. TIGHTEN SECURELY ENOUGH TO REMOVE ALL PLAY
AS SHOWN IN FIGURE 8.
DO NOT USE FOR TOWING.
REPLACE WITH NUT OF SAME TYPE IF NYLON INSERT BECOMES WORN OR NUT TURNS
FREELY ON SOCKET HEAD CAP SCREW.
Description:
2
1
FIGURE 7
5801200
Item:
2-Bike Carrier
5
4
Qty. (1)
5
Qty. (1)
WARNING

TOOLS REQUIRED:

Socket Wrench
17mm Socket
ADAPTER ALLOWS THE USE
OF 1-1/4" ACCESSORIES TO BE
USED IN 2" RECEIVERS.
DO NOT USE FOR TOWING.
CLAMPED POSITION
FIGURE 8
Flat Washer, 7/16
Hexagon Key Wrench, 8mm