Galleon NTS-6002 Donanım Kılavuzu - Sayfa 14

Sunucu Galleon NTS-6002 için çevrimiçi göz atın veya pdf Donanım Kılavuzu indirin. Galleon NTS-6002 18 sayfaları.

CONFIGURATION

After connecting all components, power up the device for it to begin running the necessary

configuration processes. The LCD display will activate and show the following:

LCD INITIALISED

ASMINT DISPON 20M

Next, the unit will check for data coming into the serial connector:

WAITING SERIAL DATA

The unit will display the current software version:

Software Version 11

A time and date will then be displayed:

Fri Jul 15 13:54:59

And the unit will seek to synchronise with either GPS or Radio:

Waiting for 1st sync

Fri Jul 15 13:56:30

During the waiting period for synchronisation, the unit will remain in an 'unsynchronised state':

Unsynchronised

Fri Jul 15 13:57:19

The unit will show that it 'knows' there is an antenna attached:

GPS Antenna OK

Fri Jul 15 13:58:31

Once in a 'synchronised state', the unit will display:

Synchronised (GPS)

Fri Jul 15 13:59:58

In this state, the display will show the GPS/Radio information as well as the date and time.

At all times, the unit will display the IP Address in the message cycle.

www.galsys.co.uk

galleonsupport.com

NTS-6002 HARDWARE MANUAL

TEL:

+44 (0) 121 608 4433

FAX:

+44 (0) 121 608 4477