DCS EH-36SS Kurulum Kılavuzu - Sayfa 11

Havalandırma Davlumbazı DCS EH-36SS için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DCS EH-36SS 14 sayfaları. The professional euro vent hood
Ayrıca DCS EH-36SS için: Kullanım ve Kurulum Kılavuzu (18 sayfalar), Kullanım ve Bakım Kılavuzu (11 sayfalar), Kullanım ve Bakım Kılavuzu (7 sayfalar), Kurulum Kılavuzu (16 sayfalar)

10) Turn the power supply on. Turn on blower and light. The Euro Hood controls are located on

the right-hand side under the canopy. If the Euro Hood does not operate, check that the

circuit breaker is not tripped or the house fuse blown. If the unit still does not operate,

disconnect the power supply and check that the wiring connections have been made

properly.

OPTIONAL DUCTLESS INSTALLATION KITS

The Euro Hood can be installed ductless in both chimney and

no chimney (under cabinet) installation. To install ductless in a

chimney installation, you must have the ductless chimney kit

(model #ECND-2SS Fig. 11) and the charcoal filter kit (model

#ECF Fig. 13). To install ductless in a no chimney installation

(under cabinet) (see Fig. 12), you must have the charcoal filter

kit (see Fig. 13).

The ductless chimney kit consists of an upper chimney (not

pictured), a lower chimney ( A) with two holes for the exhaust

air, a ductless diverter (B) which sits on the canopy of the hood

and diverts the air to the sides of the chimney, and two vent

grates (C) to cover the holes in the lower chimney (see Fig. 11).

The charcoal filter kit contains two charcoal filters which twist

onto either side of the blower inside the Euro Hood.

When installing ductless without the optional chimney kit,

some ductwork must be installed to divert the air either out of

the top of the cabinet or to the face of the soffit. The duct work

can not terminate inside the cabinet or into any dead air

space.

INSTALLATION INSTRUCTIONS

FIG.11

FIG.12

CHARCOAL FILTER

FIG.13