Dynaudio BM5 mkIII Kullanıcı Kılavuzu - Sayfa 12

Stereo sistemi Dynaudio BM5 mkIII için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dynaudio BM5 mkIII 16 sayfaları. Active monitor system
Ayrıca Dynaudio BM5 mkIII için: Kullanıcı El Kitabı (16 sayfalar), Kullanıcı El Kitabı (9 sayfalar)

Sayfayı Yazdır

Miscellaneous

Troubleshooting

If you hear no sound, check your input signal, i.e. by switching the left and right speakers.

Care

Components of the highest quality are used in your BM5 mkIII. This assures years of trouble-free operation.

Following precautions should still be made though.

Avoid running the system into severe clipping. Although there is an advanced protection system, you may be able

to destroy your speakers by severe overpowering them. The limiter works over a certain range, but exceeding this

level may send a severely clipped signal to your drivers. When a noticeable distortion occurs, please turn down

the level to your speakers.

Avoid hot-plugging the equipment connected to the monitors. Always turn off the speaker and other equipment

when plugging or unplugging signals, or switching equipment on or off.

Do not touch the drive units by hand. The tweeter especially uses a very fine fabric dome with an ultra-thin

coating.

Options

Companion subwoofers for the Dynaudio BM series are the 9S and 18S Subwoofers. Learn more about these

subwoofers at:

dynaudio.com

Service

There are no user serviceable parts inside the monitor. If service is required please contact service via:

dynaudio.com

BM User manual