Dynaudio BM5 mkIII Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Стереосистема Dynaudio BM5 mkIII. Dynaudio BM5 mkIII 16 сторінок. Active monitor system
Також для Dynaudio BM5 mkIII: Посібник користувача (16 сторінок), Посібник користувача (9 сторінок)

Друкувати сторінку
Dynaudio BM5 mkIII Посібник користувача
Miscellaneous

Troubleshooting

If you hear no sound, check your input signal, i.e. by switching the left and right speakers.
Care
Components of the highest quality are used in your BM5 mkIII. This assures years of trouble-free operation.
Following precautions should still be made though.
Avoid running the system into severe clipping. Although there is an advanced protection system, you may be able
to destroy your speakers by severe overpowering them. The limiter works over a certain range, but exceeding this
level may send a severely clipped signal to your drivers. When a noticeable distortion occurs, please turn down
the level to your speakers.
Avoid hot-plugging the equipment connected to the monitors. Always turn off the speaker and other equipment
when plugging or unplugging signals, or switching equipment on or off.
Do not touch the drive units by hand. The tweeter especially uses a very fine fabric dome with an ultra-thin
coating.
Options
Companion subwoofers for the Dynaudio BM series are the 9S and 18S Subwoofers. Learn more about these
subwoofers at:
dynaudio.com
Service
There are no user serviceable parts inside the monitor. If service is required please contact service via:
dynaudio.com
12
BM User manual