DYNAVAC NovaDryer-DHF400 Hızlı Kurulum ve Kullanım Kılavuzu - Sayfa 13

Kurutucu DYNAVAC NovaDryer-DHF400 için çevrimiçi göz atın veya pdf Hızlı Kurulum ve Kullanım Kılavuzu indirin. DYNAVAC NovaDryer-DHF400 17 sayfaları. Vacuum freeze dryer

Sayfayı Yazdır

3.Temperature‐keeping (maintaining) Stage. Set keeping time 999 min, keep temperature 30℃.

4.After finishing FORMULA setting, return to Monitoring Menu (Main Interface) , press "OPERATION".

i. Choose control mode (Program Control or Vacuum Control). Refer to procedure above on the previous page for setting.

ii. Load materials into the chamber, close the door, check if the inflation/drain valve is closed tightly and vacuum pump

tube is connected properly.

iii. Press "Start'. The system begins freeze drying process.

iv. After automatic program running is finished, Rotate the vacuum /water draining valve to the open position, then

open the door and unload the freeze dried materials.

Open Position