Galvin Flowmatic Safe-Cell Ürün Kurulum Manualline

Sıhhi Tesisat Ürünleri Galvin Flowmatic Safe-Cell için çevrimiçi göz atın veya pdf Ürün Kurulum Manualline indirin. Galvin Flowmatic Safe-Cell 8 sayfaları. Concealed dual temperature basin assembly with controller

Sayfayı Yazdır
Flowmatic
®
Safe-Cell
Basin Assembly with Controller
PRODUCT CODE:
TZ-FLOWTBAS2IN
-
SPECIFICATIONS
 Flowmatic
®
Safe-Cell
ligature solution. The unique electronic valve assembly provides a precise delivery of water, and is
specifically designed for prisons, mental health facilities and other custodial establishments.
 1.5mm thick stainless steel face plate with push activation buttons. It is designed to be mounted
flush into the wall/trough.
 Basin unit comes with stainless steel water hammer resistant 24V AC solenoids
 Flowmatic
®
Safe-Cell
button inputs and 5 solenoids. Depending on the settings programmed the solenoids will open for a
specific time once the appropriate button is pressed.
TECHNICAL DATA
Power Supply
Solenoid
Sensor
Controller
Finish (user)
Nominal Flow Rate (LPM)
NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without
notice.
®
Concealed Dual Temperature
®
dual temperature basin assembly provides the complete anti-vandal, anti-
®
controller is a 24V AC electronic control system allowing connection of up to 5
Type
Input
Output
Cable length
Input Voltage
Power Consumption
Cable length
Connection
Pressure Range (kPa)
Temperature (°C)
Type
Activation
Connections
Cable length
Input Voltage
Program type
Connections
Version 2, 30 August 2017, Page 1 of 8
Transformer
230-240V – 50Hz
24V AC 3.0AMPS 72VA
6.5m
24V – 50Hz - 60Hz
8W
5m
Inlet
½" BSP - Female
Outlet
½" BSP - Male
Min
100
Max
1000
Min
5
Max
100
IP68 24V
Push Button
3.5mm Male Jack
5m
24V AC
Standard/Special
3.5mm Jack 5 Input & DC plug 5 Output
Stainless Steel
N/A