AGS Merlin GDP4 Kullanıcı Kılavuzu - Sayfa 5

Gaz Dedektörleri AGS Merlin GDP4 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AGS Merlin GDP4 12 sayfaları. Gas safety products, gas detection panel

Sayfayı Yazdır

Merlin GDP4

2.4 EM REMOTE (Remote emergency shut off buttons)

The terminal for remote emergency shut-off buttons is detailed on the

circuit board as [EM REMOTE].

These connections are linked out as a factory setting.

Remote emergency shut-off buttons should be volt free and wired to

the Merlin GDP4 using two-core cable.

2.5 HEAT SENSOR

The terminal for heat detectors is detailed as [HEAT SENSOR].

These connections are linked out as a factory setting.

Heat detectors should be volt free and wired to the Merlin GDP4 using two-

core cable.

2.6

FIRE PANEL

The terminal for fire alarms is detailed as [FIRE PANEL].

These connections are linked out as a factory setting.

Fire alarms should be volt free and wired to the Merlin GDP4 using two-

core cable.

2.8

SOUNDER/STROBE

The terminal for audible/visual alarms is detailed on the circuit board as

[SOUNDER/STROBE].

Sounder alarms should be wired using low voltage cable and wired to the

Merlin GDP4 using two-core cable.

This terminal has a 24VDC output.

Rev: 06 05-19

2.7

BMS OUT

Terminal connections are available on the circuit board for connections

to Building Management Systems etc.

Marked on the circuit board as [BMS OUT - N/O - COM - N/C] these are

volt free connections.

User Guide