HIKE CREW HICPSBT Kullanıcı Kılavuzu - Sayfa 8

Su Isıtıcı HIKE CREW HICPSBT için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKE CREW HICPSBT 15 sayfaları.

6. Lower the filter end of the pump until it is fully submerged in a suitable

water reservoir.

Note: Do not use water directly from rivers, lakes, or the ocean. Do not,

under any circumstance, use saltwater with this appliance.

7. Connect the shower head attachment (attachment #3) to the water

outlet (connection point #3).

8. Slide shower head flow switch to the "on" position.

USING THE SHOWER

1. Power on the unit.

2. Check the Battery Charge Level to see if sufficient power is available.

If not, connect to the AC or DC adaptor (attachment #4).

3. Position the gas temperature control in the central position between

MIN and MAX. Then, press the START button and water will start to

flow within a few moments.

4. The electric ignition should be heard igniting the burner. When lit, the

"Flame" icon on the display will illuminate and the water outlet

temperature read out will increase.