Dynojet POWER COMMANDER Kurulum Talimatları - Sayfa 2
Motosiklet Aksesuarları Dynojet POWER COMMANDER için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Dynojet POWER COMMANDER 3 sayfaları. For aprilia mille 2000; aprilia mille 2001; aprilia mille 2002; aprilia mille 2003
Ayrıca Dynojet POWER COMMANDER için: Kurulum Talimatları Kılavuzu (6 sayfalar)
Sayfayı Yazdır
PCIII connectors
Stock connector
Wire tap
i902-411
www.powercommander.com
Stock connector
PCIII connectors
Loosen these bolts
Grey wire from PCIII
1
Remove the seat.
2
Lift up the front of the fuel tank.
3
Disconnect the wiring harness
from the injector on the left
hand side of the bike by sqeez-
ing the connector.
4
Connect one pair of the leads
from the PCIII in-line of the
stock harness and throttle body
(Fig.A).
5
Repeat steps 3-4 for the right
hand side (Fig.B).
6
Locate the throttle position sen-
sor on the trottle bodies. Locate
the yellow wire with the brown
tracer coming from the sensor.
Connect the supplied wire tap to
this wire.
7
Plug the grey wire from the
PCIII to the wire tap (Fig. C).
Note: It is recommended to use dialec-
tric grease on these connections.
2000-2003 Aprilia Mille - PCIII USB - 2