Coram Showers OPTIMA Series Manuel - Sayfa 12

Duş Kabinleri Coram Showers OPTIMA Series için çevrimiçi göz atın veya pdf Manuel indirin. Coram Showers OPTIMA Series 16 sayfaları.

From inside

Check the door frame is vertical and is centrally positioned between the corner post and wall channel.

From inside the enclosure, in the positions shown, drill through the corner post and wall channel into the fixed panel and

magnetic profiles using a 3mm drill bit, do not drill too deep!

Fix using 6 x 10mm screws and screw caps.

Position the 'magnetic

profile' into the wall

channel and slide

down so that it fully

slots onto the end

moulding of the

bottom rail.

Position the top rail onto the top of the 'fixed panel' and

'magnetic profile'. Adjust the position of the fixed panel

bracket as required. line up the holes and fix using 2 x

13mm screws.

13mm

Inside

ø 3

10mm