Coram Showers OPTIMA Series Manuel - Sayfa 14

Duş Kabinleri Coram Showers OPTIMA Series için çevrimiçi göz atın veya pdf Manuel indirin. Coram Showers OPTIMA Series 16 sayfaları.

Sayfayı Yazdır
14
The 'cam adjusters' at the top and bottom of the door may need adjusting so that the door slides freely and the magnetic seal is
flush against the magnetic profile when the door is closed.
a: Loosen all 4 cam adjuster screws (1 turn maximum). b: Turn the cam adjusters (by hand or using a 16mm spanner) until the
door hangs vertically. Re-tighten the screws - do not over tighten. c: Push fit all 4 covers (PN50103) onto the door.
15
16
Lubricate the inner
top and bottom
rails using the wipe
provided.
14
From inside
PN60058
b
Fit the door handles to the door ensuring the supplied
handle washers are used on each side of the glass.
A chrome finish handle is supplied for all frame finish
options.
17
Fit the Bump Stops to the
rail, top and bottom as
shown on the fixed panel
side. Tighten the screw with
a screw driver, do not over
tighten. Place cover cap in
the hole.
a
c
PN50103
PN3222
PN50382
PN4745
Fixed Panel