Maimiao MX5 Kullanıcı Kılavuzu - Sayfa 4

Güvenlik Kamerası Maimiao MX5 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Maimiao MX5 5 sayfaları. Smart light

Sayfayı Yazdır
Operation Status Description
1.Red indicator : blinks means searching network.
Blue indicator: blinks means network connection is successful.
meanwhile searching the server. Always lights means device online.
Yellow indicator: blinks means Ethernet active.
Green indicator: blinks means Ethernet access successful.
2. Reset to factory setting: After powered on 1 minute , press and hold
the reset button for more than 5 seconds then release, and hear the
voice"reset complete" means reset to factory setting successful.

Main Parameter

Product Name
Smart Security Light Camera
Model Number
MX5
Camera Resolution
1920*1800（1080P)
Viewing angle
110°
Operational Temperature
WIFI
IEEE 802.11b/g/n
Power Supply
100-240VAC ,50/60HZ,0.2A
Power
25W(MAX)
Weight
980g
Dimensions(H x W x D)
300mmx111mmx112mm
-20℃ to +50 ℃
Common Fault List
Fault type
Indicator Status
No Power
Indicator off
Red & Blue LED
Boot Failed
always lights
Connect to
Red LED always blinks
W iFi Failed
Connect to
Server
Blue LED always blinks
Failed
4
Solution
Check the power connection status
Power off 5 seconds, then power on again
Check the W iFi signal strength near the
installation of the device through the
mobile phone (it needs to be greater than
or equal to 2), check whether the W iFi
password is correct, if the password is not
correct, please click return, reenter
password.
Check whether the network is connected
to the Internet normally