Gamber Johnson GETAC V110 Kurulum Talimatları - Sayfa 4

Yerleştirme İstasyonu Gamber Johnson GETAC V110 için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Gamber Johnson GETAC V110 5 sayfaları.

DOCKING AND UNDOCKING THE COMPUTER

DOCKING THE COMPUTER

1. Turn the computer off.

2. Un-latch the dock, making sure the

rear hooks move backward (Figure 1).

3. With the computer held at an

angle, place the two notches on the

front edge of the computer into the

front hooks. (Figure 2)

4. Lower the computer down on to

the dock.

5. While pushing the computer down,

to compress the docking connector,

close the latch to engage the rear

hooks into the notches on the back

edge of the computer. (Figure 3)

6. Lock the latch, if required, for

security.

7. Adjust the position of the screen

support. (Figure 4)

UNDOCKING THE COMPUTER

1. Turn the computer off. Move screen

support back, close display.

2. Unlock latch, if locked.

3. Press the Lock Button on the latch.

The latch will spring open and the rear

hooks will disengage from the computer

case.

4. Lift computer up off dock, back

edge first.

Figure 1

Figure 2

Figure 3

Figure 4

4/5