Deagostini Model Space HUMMER H1 Manuel - Sayfa 15

Oyuncak Deagostini Model Space HUMMER H1 için çevrimiçi göz atın veya pdf Manuel indirin. Deagostini Model Space HUMMER H1 18 sayfaları.

Sayfayı Yazdır

HUMMER H1: STEP BY STEP

Adjust the servo so that

it fits neatly into the hole,

with all the screw holes

lined up directly.

Pass the cable coming

out of the steering servo

along the gap between

the throttle servo and out

to the back of the radio

box top.

Very carefully remove the

temporarily-fixed radio

box top from the chassis

assembly (Stage 47). To

do this, you will need to

unscrew the set screw

holding the steering rod

in place.

Lightly tighten the screw

with a screwdriver.

Place the first 3 × 10mm

binding-head self-tapping

screw into one of the

holes in the servo.

Lower the radio box top

onto the box bottom

fitted to the main chassis

in Stage 46. The holes

along the edge of the box

top should line up with

those on the box bottom.

219

Hold the radio box top

with its underside facing

upwards, with the throttle

servo in your other hand,

with the circular output

shaft at the top of the box.

Place the servo through

the hole in the radio box

top so that the screw

holes line up to each other

(see arrows).

Fit the remaining three 3 ×

10mm binding-head self-

tapping screws into the

holes in the servo. Make

sure that the servo is set

perfectly straight into the

hole in the radio box top,

then tighten each screw

fully to secure the part.

™