Maintronic Sx2 Tuning-Dongle Kurulum Kılavuzu

Bisiklet Aksesuarları Maintronic Sx2 Tuning-Dongle için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Maintronic Sx2 Tuning-Dongle 5 sayfaları. For ebike; with bosch active / bosch performace line cablekit sx2kb-perf

Sx2 Tuning-Dongle
with Bosch Active / Performace
Line cablekit Sx2KB-Perf

Installation manual

Part no.:
16.100; 16.105
Document: Sx2_Bosch_Active_Performance_cable-
kit_manual_B01_V10_EN
Creation date:
01 / 2014
For connecting the wires with the blade connectors
insert each wire (without stripping) of the Sx2 Tuning-
Dongle cable into the one-sided openings of the blade
connectors (2).
Please read this instruction carefully before using and
keep them for later use.
Important!
Pedelec drivers, which want to test the drive efficiency
with a plugged Sx2 Tuning-Dongle outside the scope of
Road Traffic Licensing Regulation e.g. private land, cor-
doned racetracks, abroad or with an insurance license
plate get with the Sx2 Tuning-Dongle a technical way.
Unplug the Sx2 Tuning-Dongle to set your pedelec back
to the original state.
Instruction to the road traffic regu-
lations and disclaimer
We expressly point out that the Sx2 Tuning-Dongle may
only be used on private closed areas or designated rou-
tes.
Using of the Sx2 Tuning-Dongle manipulates the speed
of your pedelec, this is not allowed on public roads.
No liability is assumed for any current and future re-
sulting damage to objects and / or persons from any
improper installation and / or improper use. Use at
your own risk!
Your eBike warranty can be limited or expire by the
using and installation of the SX2 Tuning-Dongle. Be-
cause an installed SX2 Tuning-Dongle is a modification
or a manipulation of your eBike.
1
This notice is generated automatically and is valid
without signature.
Created version: November 2012
Features description
Starting between 12 and 25 km/h, the speed is
divided by / 2, and the display shows exactly the
half speed. This provides to keep the BOSCH dri-
ving modes
Pluggable and compact, this design allows driving
in the public by simply pulling the Sx2 Tuning-
Dongle out of the socket jack.
For protection the SX2 Tuning-Dongle is molded,
maintenance free and no battery are required.
Enhancements like turning off during driving or
cable extensions are possible with trading goods.
Before installation
At the end of the cablekit is a 3,5 mm stereo jack so-
cket (7) for plug-in of the Sx2 Tuning-Dongle (8). The Sx2
cablekit for Bosch Active/Performance Line is connec-
ted parallel to the speedsensor (1) and crimped with gel
insulated blade connectors (2).
The protective cover of the engine terminal box has to
be removed to get to the terminal.
If you don´t have right tool, it should be installed by a
good eBike dealer.
2
to Control
Unit Intuvia
1
3
Speed-
sensor