Maintronic Sx2 Tuning-Dongle Посібник з монтажу

Переглянути онлайн або завантажити pdf Посібник з монтажу для Аксесуари для велосипедів Maintronic Sx2 Tuning-Dongle. Maintronic Sx2 Tuning-Dongle 5 сторінок. For ebike; with bosch active / bosch performace line cablekit sx2kb-perf

Друкувати сторінку

Sx2 Tuning-Dongle

with Bosch Active / Performace

Line cablekit Sx2KB-Perf

Installation manual

Part no.:

16.100; 16.105

Document: Sx2_Bosch_Active_Performance_cable-

kit_manual_B01_V10_EN

Creation date:

01 / 2014

For connecting the wires with the blade connectors

insert each wire (without stripping) of the Sx2 Tuning-

Dongle cable into the one-sided openings of the blade

connectors (2).

Please read this instruction carefully before using and

keep them for later use.

Important!

Pedelec drivers, which want to test the drive efficiency

with a plugged Sx2 Tuning-Dongle outside the scope of

Road Traffic Licensing Regulation e.g. private land, cor-

doned racetracks, abroad or with an insurance license

plate get with the Sx2 Tuning-Dongle a technical way.

Unplug the Sx2 Tuning-Dongle to set your pedelec back

to the original state.

Instruction to the road traffic regu-

lations and disclaimer

We expressly point out that the Sx2 Tuning-Dongle may

only be used on private closed areas or designated rou-

tes.

Using of the Sx2 Tuning-Dongle manipulates the speed

of your pedelec, this is not allowed on public roads.

No liability is assumed for any current and future re-

sulting damage to objects and / or persons from any

improper installation and / or improper use. Use at

your own risk!

Your eBike warranty can be limited or expire by the

using and installation of the SX2 Tuning-Dongle. Be-

cause an installed SX2 Tuning-Dongle is a modification

or a manipulation of your eBike.

This notice is generated automatically and is valid

without signature.

Created version: November 2012

Features description

•

Starting between 12 and 25 km/h, the speed is

divided by / 2, and the display shows exactly the

half speed. This provides to keep the BOSCH dri-

ving modes

•

Pluggable and compact, this design allows driving

in the public by simply pulling the Sx2 Tuning-

Dongle out of the socket jack.

•

For protection the SX2 Tuning-Dongle is molded,

maintenance free and no battery are required.

•

Enhancements like turning off during driving or

cable extensions are possible with trading goods.

Before installation

At the end of the cablekit is a 3,5 mm stereo jack so-

cket (7) for plug-in of the Sx2 Tuning-Dongle (8). The Sx2

cablekit for Bosch Active/Performance Line is connec-

ted parallel to the speedsensor (1) and crimped with gel

insulated blade connectors (2).

The protective cover of the engine terminal box has to

be removed to get to the terminal.

If you don´t have right tool, it should be installed by a

good eBike dealer.

to Control

Unit Intuvia

Speed-

sensor