HIKVISION D0T Kullanıcı Kılavuzu - Sayfa 8

Güvenlik Kamerası HIKVISION D0T için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION D0T 17 sayfaları. Audio turret camera
Ayrıca HIKVISION D0T için: Kullanıcı Kılavuzu (17 sayfalar), Kullanıcı Kılavuzu (15 sayfalar), Kullanıcı Kılavuzu (11 sayfalar), Kullanıcı Kılavuzu (11 sayfalar), Kullanıcı Kılavuzu (17 sayfalar)

4. Route the cables through the cable hole, or the side

opening.

5. Secure the camera on the mounting base.

6. Connect the corresponding power cord, and video

cable.

7. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

2.2 Installation of Type II Camera

Before you start:

The installation of ceiling mounting and wall mounting

are similar. Following takes ceiling mounting as an

example.

Steps:

1. Drill the screw holes and the cable hole (optional)

on the ceiling.

Note:

Drill the cable hole, when adopting the ceiling outlet

to route the cable.

2. Loosen the trim ring to remove the mounting base.

3. Secure the mounting base on the ceiling with

screws.

Figure 2-5 Secure the Mounting Base

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

Pull out the clip plate, and then to combine

the camera with the mounting base.

Push the clip plate in, and secure the camera

by tightening the screw.

Figure 2-3 Secure the Camera

Figure 2-4 3-Axis Adjustment