HIKVISION D7T Series Kullanıcı Kılavuzu - Sayfa 7

Güvenlik Kamerası HIKVISION D7T Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION D7T Series 12 sayfaları. Bullet & turret camera
Ayrıca HIKVISION D7T Series için: Kullanıcı Kılavuzu (11 sayfalar)

Sayfayı Yazdır
HIKVISION D7T Series Kullanıcı Kılavuzu
4. Connect the corresponding cables.
5. Adjust the camera according to Figure 2-9 to get an
optimum angle.
1). Loosen the P screw to adjust the pan direction
[0°~360°]. Tighten the screw after completing
the adjustment.
2). Loosen the T screw to adjust the tilt direction
[0°~180°]. Tighten the screw after completing
the adjustment.
3). Loosen the R screw and rotate the camera
[0°~360°] to adjust the lens to the surveillance
angle. Tighten the screw after completing the
adjustment.
Rotation Position Range
[0°-360°]
2.2.2 Ceiling/Wall Mounting with Gang Box
You need to purchase a gang box separately if you adopt celling
mounting.
Steps:
1. Take apart the gang box and align the screw holes of
the bullet camera and the gang box cover.
2. Route the cables through the cable hole of gang box
and fix the camera with the gang box cover with the
supplied screws, as shown in Figure 2-11.
Figure 2-11 Fix the Camera with the Gang Box
Figure 2-9 3-axis Adjustment
Figure 2-10 Gang Box
Screw
Pan Position Range
[0°-360°]
P Screw
Tilt Position Range
[0°-180°]
Gang Box Cover
T Screw
R Screw