HIKVISION D7T Series Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Камера спостереження HIKVISION D7T Series. HIKVISION D7T Series 12 сторінок. Bullet & turret camera
Також для HIKVISION D7T Series: Посібник користувача (11 сторінок)
Друкувати сторінку
4. Connect the corresponding cables.
5. Adjust the camera according to Figure 2-9 to get an
optimum angle.
1). Loosen the P screw to adjust the pan direction
[0°~360°]. Tighten the screw after completing
the adjustment.
2). Loosen the T screw to adjust the tilt direction
[0°~180°]. Tighten the screw after completing
the adjustment.
3). Loosen the R screw and rotate the camera
[0°~360°] to adjust the lens to the surveillance
angle. Tighten the screw after completing the
adjustment.
Rotation Position Range
[0°-360°]
2.2.2 Ceiling/Wall Mounting with Gang Box
You need to purchase a gang box separately if you adopt celling
mounting.
Steps:
1. Take apart the gang box and align the screw holes of
the bullet camera and the gang box cover.
2. Route the cables through the cable hole of gang box
and fix the camera with the gang box cover with the
supplied screws, as shown in Figure 2-11.
Figure 2-11 Fix the Camera with the Gang Box
Figure 2-9 3-axis Adjustment
Figure 2-10 Gang Box
Screw
Pan Position Range
[0°-360°]
P Screw
Tilt Position Range
[0°-180°]
Gang Box Cover
T Screw
R Screw