GameChanger plus pedal Kullanıcı Kılavuzu - Sayfa 5
Müzik Pedalı GameChanger plus pedal için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. GameChanger plus pedal 8 sayfaları. Sustain unit for all melodic instruments
Sayfayı Yazdır
OUTPUTS and SPLIT/MIX switch
The PLUS Pedal features two ¼ inch output jacks labeled "OUT" and "CLEAN
OUT/FSW". There is also a toggle switch on the Pedal's side, labeled SPLIT & MIX.
"OUT" is the PLUS Pedal's main output which can send two kinds of signal:
1) the combined DRY signal coming from your instrument with the WET
signal, this is the PLUS Pedal's most commonly used mode and it can be activated
by setting the above-mentioned toggle switch to "MIX"
2) only the isolated WET signal generated by the PLUS Pedal. This way
your instrument's DRY signal will be muted, but you will still be able to produce
sustained tones as before, by using the foot-pedal.
This mode of playing is called "WET only" – and it comes in very handy when creat-
ing soundscapes, cinematic ambiance and other unworldly sound effects. The WET
only mode can be activated by positioning the toggle switch to "SPLIT".
9
The second output, labeled "CLEAN OUT/FSW" sends out the unaffected Dry signal
from your instrument at all times. Thanks to this dual output system the PLUS
Pedal offers a lot of diversity when it comes to setting up your signal chain and
creating stereo effects. The "CLEAN OUT/FSW" output also doubles as an input for
the WET Only Footswitch.
Use two amps for a stereo feel;
AMP 1
mixing desk
In a studio setting - it can be
DAW
useful to keep a separate DRY
signal going into a mixing board
or recording software at all
times.
10
AMP 2