Adexa CH-09FLCD Kullanım Kılavuzu - Sayfa 12
Isıtıcı Adexa CH-09FLCD için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Adexa CH-09FLCD 16 sayfaları.
Sayfayı Yazdır
other mode, cannot use fan. Switch to other work condition, the
fan will automatically shut off.
10.By pressing
display temperature and setting temperature
could be switched between Fahrenheit and degree centigrade.
REMOTE CONTROL
HOW TO INSTALL BATTERIES
1. Open the battery box on the back
Commented [q1]: Add the "+" "-" mark
of remote control, and install One
button battery(CR20323V).
2. Put the battery inside the slot, with
anode and cathode in right directions.
3. Put on the back cover.
Slide the cover to open Be sure the direction is correct.
Notice:
1. The anode and cathode of the batteries must be corresponding
"+" and "-" on the remote controller.
to the
signs
of
2. For long time no use, take out the battery.
3. To prevent environmental pollution, take out the used battery
and dispose safety and appropriately.
How to Use
To operate the
convector
heater, aim the Remote controller at the
signal receptor. The remote controller at a distance of up to 6m