Adexa CH-09FLCD Kullanım Kılavuzu - Sayfa 11

Isıtıcı Adexa CH-09FLCD için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Adexa CH-09FLCD 16 sayfaları.

5. And then by pressing the

6. Under mode 1000W/13000W/2300W, pressing the

button to increase or decrease the temperaturesetting. It

starts to heat when the environment temperature below 2℃than

the setting temperature. It will stop heating as soon as reach the

setting temperature. The setting temperature range is 5-37℃.

7. Pressing

button to get heat directly.One time pressing is in

1000W setting, two time pressing is 1300W setting, three time

pressing is 2300W, and four time pressing is Prevent Frost

setting.

Prevent frost: after choosing this mode, icon is lighted,

environment temperature is 5℃, 1000W heating element works,

at the same time "1000W" icon light. When the environment is

4℃, 1300W heating element works, at the same time "1300W"

icon light. When the environment≤3℃,1000W and 1300W

heating elements work at the same time, "2300W" icon light.

When the environment ≥6℃, thermal fuse stops heating, icon

crush out, only prevent frost icon light.

8. By pressing

, you can set the timer from 1-24 hours.

9. By pressing

, could choose open or close fan, the fan icon

will be lighted on the screen when the fan is working. Only under

1000W/1300/2300W mode, could open or close the fan. Under

button to start the unit.

and