Bristan W BASIN08 C Montaj Talimatları ve İçindekiler Listesi - Sayfa 4
Sıhhi Tesisat Ürünleri Bristan W BASIN08 C için çevrimiçi göz atın veya pdf Montaj Talimatları ve İçindekiler Listesi indirin. Bristan W BASIN08 C 8 sayfaları. Round push button
Ayrıca Bristan W BASIN08 C için: Kurulum Talimatları ve Kullanım Kılavuzu (8 sayfalar)
Sayfayı Yazdır
4. installation – – – – W BASIN08 C (slotted)
4. installation
4. installation
4. installation
1.
Identify all components are present prior to instillation.
2. Fit the waste body (1) & rubber washer (2) into the basin.
3. Use the pure silicon sealant where necessary. Place shaped rubber washer (3)
under the basin & secure waste by tightening backnut (4) as shown on the
diagram below.
4. In order to fill the basin, the button in the middle of the waste needs to be
pressed down. To release water, press the button again.
5. Check all joints & connections for leaks
6. See page 04 for aftercare instructions
02
W BASIN08 C (slotted)
W BASIN08 C (slotted)
W BASIN08 C (slotted)
Parts contents list
Parts contents list
Parts contents list
Parts contents list
1. Waste body
2. Rubber washer
3. Shaped rubber washer
4. Backnut