Bristan W BASIN08 C Montaj Talimatları ve İçindekiler Listesi - Sayfa 5

Sıhhi Tesisat Ürünleri Bristan W BASIN08 C için çevrimiçi göz atın veya pdf Montaj Talimatları ve İçindekiler Listesi indirin. Bristan W BASIN08 C 8 sayfaları. Round push button
Ayrıca Bristan W BASIN08 C için: Kurulum Talimatları ve Kullanım Kılavuzu (8 sayfalar)

Sayfayı Yazdır

Bristan W BASIN08 C Montaj Talimatları ve İçindekiler Listesi

installation continued – – – – W BASIN09 C (unslotted)

installation continued

1. Identify all components are present prior to instillation.

2. Fit the waste body (1) & rubber washer (2) into the basin.

3. Use a pure silicon sealant where necessary. Secure waste by tightening backnut

(3) as shown on the diagram.

4. In order to fill the basin, the button in the middle of the waste needs to be

pressed down. To release water, press button again.

5. Check all joints & connections for leaks.

6. See page 04 for aftercare instructions.

IMPORTANT

Due to the design of this waste & the type of basins it is suitable for e.g an

overflow less glass basin. It is imperative that any water fittings are turned

off before the basin is allowed to overfill.

W BASIN09 C (unslotted)

Parts contents list

1. Waste Body

2. Rubber Washer

3. Backnut