Bristan W BASIN08 C 피팅 지침 및 내용물 목록 - 페이지 5

{카테고리_이름} Bristan W BASIN08 C에 대한 피팅 지침 및 내용물 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan W BASIN08 C 8 페이지. Round push button
Bristan W BASIN08 C에 대해서도 마찬가지입니다: 설치 지침 및 사용자 설명서 (8 페이지)

페이지 인쇄

installation continued – – – – W BASIN09 C (unslotted)

installation continued

1. Identify all components are present prior to instillation.

2. Fit the waste body (1) & rubber washer (2) into the basin.

3. Use a pure silicon sealant where necessary. Secure waste by tightening backnut

(3) as shown on the diagram.

4. In order to fill the basin, the button in the middle of the waste needs to be

pressed down. To release water, press button again.

5. Check all joints & connections for leaks.

6. See page 04 for aftercare instructions.

IMPORTANT

Due to the design of this waste & the type of basins it is suitable for e.g an

overflow less glass basin. It is imperative that any water fittings are turned

off before the basin is allowed to overfill.

W BASIN09 C (unslotted)

Parts contents list

1. Waste Body

2. Rubber Washer

3. Backnut