Bristan W BASIN08 C Instrucciones de montaje y lista de contenidos - Página 5

Navegue en línea o descargue pdf Instrucciones de montaje y lista de contenidos para Productos de fontanería Bristan W BASIN08 C. Bristan W BASIN08 C 8 páginas. Round push button
También para Bristan W BASIN08 C: Instrucciones de instalación y manual del usuario (8 páginas)

Imprimir página

Bristan W BASIN08 C Instrucciones de montaje y lista de contenidos

installation continued – – – – W BASIN09 C (unslotted)

installation continued

1. Identify all components are present prior to instillation.

2. Fit the waste body (1) & rubber washer (2) into the basin.

3. Use a pure silicon sealant where necessary. Secure waste by tightening backnut

(3) as shown on the diagram.

4. In order to fill the basin, the button in the middle of the waste needs to be

pressed down. To release water, press button again.

5. Check all joints & connections for leaks.

6. See page 04 for aftercare instructions.

IMPORTANT

Due to the design of this waste & the type of basins it is suitable for e.g an

overflow less glass basin. It is imperative that any water fittings are turned

off before the basin is allowed to overfill.

W BASIN09 C (unslotted)

Parts contents list

1. Waste Body

2. Rubber Washer

3. Backnut