Gamma 6004 Kullanıcı El Kitabı - Sayfa 9

Tel Çekme Makineleri Gamma 6004 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Gamma 6004 20 sayfaları. 6 point mounting
Ayrıca Gamma 6004 için: Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (19 sayfalar)

Sayfayı Yazdır

when the handle is grasped and attempts are made to move it. Should any supports lose

contact with the frame while stringing, they should be re-tightened.

MOUNTING THE FRAME

BADMINTON MOUNTING

Frame Shoulder Support Adjustment

The shoulder supports are designed to rotate

and can be adjusted to provide maximum

support to the racquet frame. Rotate the

support so that the pads contact the frame

squarely when the arms are closed against

the racquet. Should the shoulder supports

block string holes, adjust the frame support

slides to re-position the racquet between the

arms so the shoulder supports make contact

with the racquet between grommet holes.

Securing the Shoulder Supports

To secure the racquet frame with the shoulder

supports, rotate the large adjustment knobs

on the outside of the mounting stands clock-

wise to bring the mounting arms together.

Adjust until ﬁ rm contact is made between the

shoulder supports and the frame. Re-adjust

the stand position as needed to ensure that

the frame supports are in ﬁ rm contact with

the racquet at 6 and 12 o'clock. Do not over

tighten any of the supports as racquet de-

formation may occur. The supports should

be tightened to the point where the racquet

frame will not move in the mounting system

Badminton Shoulder Support Protec-

tion Pad Installation

Slide the badminton shoulder support cover

over the shoulder supports. There is no need

to remove the tennis shoulder supports.

Note: An optional badminton frame support

for the head of the racquet is available.