Gamma Silhouette Borealis X Z Kullanıcı Kılavuzu - Sayfa 3

DJ Ekipmanları Gamma Silhouette Borealis X Z için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Gamma Silhouette Borealis X Z 18 sayfaları. Led moving wash/beam

Introduction and Setup

1.

Unpacking and In the Box

Thank you for choosing the Borealis X Z from GAMMA LED Vision. You will see you have
acquired a powerful and versatile moving light.
Inside the box you should find:
Borealis X Z Fixture:
Omega Brackets
DMX Cable
1m PowerCon to Edison Cable
(Flight case, Safety cable and Clamps are optional, please contact your dealer)
Please check carefully that there is no damage from shipping. Should there be any problems,
please consult your dealer and don't use the light until you've verified it's good to go!

Mounting and Operation

Before installation, please read the user manual carefully, then prepare Omega Brack-
ets (2 pcs), Clamps (2 pcs), and Safety Cable (1 pc).
Clamp Mounting: The Silhouette Borealis X Z provides a unique mounting bracket assem-
bly that integrates the bottom of the base, and the safety cable rigging point in one unit.
When mounting this fixture to truss be sure to secure an appropriately rated clamp to the
included omega bracket using a M10 screw fitted through the center hole of the omega
bracket.
As an added safety measure be sure to attached at least one properly rated safety cable
to the fixture using on of the safety cable rigging point integrated in the base assembly.

Features

 Extremely small, fast and powerful LED moving head.
 540º Pan and 270º Tilt
 DMX Channels: 10CH, 15CH, 21CH, 37CH, and 39CH
 Ring Control in 3 Segments
 10º -60º Zoom
 Strobe 1-20hz
 DMX Control
 Quiet Motors and Fans
Silhouette Borealis X Z – GAMMA LED Vision
1
1
1
1
Page 3 of 18