Major Manufacturing ADAMS RITE 4501 Series Talimatlar Kılavuzu - Sayfa 8

Kilitler tarafından Major Manufacturing ADAMS RITE 4501 Series için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Major Manufacturing ADAMS RITE 4501 Series 10 sayfaları. Lip strike template

Sayfayı Yazdır

This is the area you did not cut through in the

step above. Adjust the depth of the router to

cut the thickness of the jamb material only,

this should be a cut depth of only about 1/8

inch. Use the router to nibble away this area.

Remove the router template , clean off the

lube and de-burr the sharp edges with a

scraper or a file.

Drill out the holes left by the tek screws to

3/16". These holes will be used to mount the

factory mounting bracket.

Page 8