jali Dresser-Multi Montaj Talimatları Kılavuzu - Sayfa 3

İç Mekan Mobilyaları jali Dresser-Multi için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. jali Dresser-Multi 11 sayfaları.

Here's just the example lower section in more detail. Each box is made up of a Box Top, Box Base,

Box Back, LH Side, RH Side and Valance. Look out for engravings to help identify parts. Depending

on your design, boxes may feature Shelves, Dividers and/or Doors. Refer to the Parts Diagram to

confirm this arrangement.

The Outer Sides go at each end of the whole unit, e.g. Box 1 LH Side & Box 3 RH Side.

The rest are Inner Sides. Inner Sides will have Adjustable Feet. Inner RH Sides have a spacer

attached where the boxes will be connected together.

Box 3 RH Side

Box 1 LH Side

Box 3

Box 2

Box 1

Valance

Shown without Doors

Adj. Foot

PLACE FIXINGS

We'll start with the lower section. You can

Nickel Cam

Cam Bolt

use the following instructions to prepare the

upper section too (with minor adaptations), but to

keep things simple, come back to this later.

Outer Side

1. Place Nickel Cams in the Outer Sides, as they

will be visible. Ensure they are facing outwards.

Using a screwdriver, or power tool on a low

setting, screw the Cam Bolts into the

available 5mm holes.

Assembly Instructions: Multi Section Dresser

Page 3 of 11