jali Dresser-Multi Montaj Talimatları Kılavuzu - Sayfa 4

İç Mekan Mobilyaları jali Dresser-Multi için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. jali Dresser-Multi 11 sayfaları.

2. For all the remaining Box Sides use White Cams instead, as they will be hidden. Place the White

Cams in all the available holes, facing outwards. Attach the Adjustable Feet using the Foot Plate and

20mm PAN Screws for each assembly. However, you should pilot drill these first to avoid splitting

the wood. The Adjustable Foot should be set to about 25mm.

White Cam

3. This example does not include

any Dividers. However, if your

design does, look for 5mm 'through'

holes. Each hole requires a Cam Bolt

on each side. Screw in all Cam Bolts

required on one side of the Divider, then

turn the Divider over, and screw in Cam

Bolts, in the same holes, on the opposite side.

4. On taller units, one or more of the outer

Shelves (in the outer boxes) may have a cam

hole. Place Nickel Cams in these.

5. For all the Uprights, fit Cam Bolts to all 5mm holes.

There is also a 6mm hole – leave this for now.

Assembly Instructions: Multi Section Dresser

Adjustable Foot

Fit a Cam Bolt into each

hole on the top side

Normal

RH Upright

Inner Side

Foot Plate

Set to 25mm

Shelf

20mm PAN Screw

25mm

Divider

Fit a second Cam Bolt

into the same holes on

the underside

Shelf

with Cam/s

Mid Upright/s

LH Upright

Cam Bolt

Page 4 of 11