Green Frog Designs Duck & Goose House Large Nasıl Kullanılır ve Bakım Yapılır - Sayfa 5
Çiftlik Ekipmanları Green Frog Designs Duck & Goose House Large için çevrimiçi göz atın veya pdf Nasıl Kullanılır ve Bakım Yapılır indirin. Green Frog Designs Duck & Goose House Large 6 sayfaları.
Sayfayı Yazdır1
Fit one Vent Cover to the gridded side of the Left Side
Wall using a 30mm screw, a standard washer, a 25mm
washer and nylock nut (as shown in the diagram above).
Tighten the nut until the vent can rotate using gentle
pressure. It should not spin freely.
Fit the other vent cover to the Side Wall in the same
way. The fourth vent does not have a cover, to ensure
the birds have some fresh air at all times.
3
Fit the Front Wall (patterned face outermost) to the end
with the double-hole lugs using Pi-Clips.
5
Fit the Roof Clips to the Front Wall and Upper Back Wall
using Pi-Clips.
Printed on recycled paper
HOW TO ASSEMBLE
2
Fit both Side Walls to the Base using Pi-Clips. Ensure
that the Base double-hole lugs are at the front, and the
patterned side is uppermost.
Fit the Roof Support and Base Support between the two
side walls.
4
Fit the Upper Back Wall using Pi-Clips and then the Back
Door using Linch Pins.
6
Fit the Door Bar to the inside top of the Front Wall with
Pi-Clips.
© green frog designs limited 2010
Page 5 of 6