Gantner GAT Access 6100 F Kullanıcı Kılavuzu - Sayfa 2

Dokunmatik terminaller Gantner GAT Access 6100 F için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Gantner GAT Access 6100 F 4 sayfaları. Access control terminal with biometry

Technical data
Nominal voltage:
Permitted input voltage:
Aver. power consumption:
Data storage:
Internal clock:
Reader type:
Frequency reading field:
GAT FR 055 sensor:
Display elements:
Dimensions
93 mm (3.66")
1
2
3
4
7
8
93 mm (3.66")
Typical application
Power supply
Network
Turnstile
Valid as from July 31
2013 • Technical data subject to modifications without notice!
th
2
DB_GAT-ACCESS6100F--BIO-EN_11.indd • PartNo.: 243526
12/24 VDC (SELV - safety extra-low
voltage)
10 to 28 VDC
- Full operation sensor in: 4.5 W
- Full operation sensor out: 3.5 W
Internal EEPROM memory for
configuration and booking memory,
data preservation min. 10 years
Data preservation approx. 12 h
(Gold-Cap)
MIFARE
TM
Standard
13.56 MHz
- Scanner type: optical sensor,
500 dpi @ 8-bit per pixel,
active area: 13 x 20 mm
- Verification time: < 0.8 sec.
- Identification time: < 1 sec.
- False acceptance rate 0.01%
(recommended), adjustable over wide
range
- Full graphical monochrome display
(LCD) with white LED background
lighting, resolution 128 x 64 pixels,
visible area 50 x 25 mm
- RFID reader (illuminated)
- Acoustic signal
- 4-segment LED display with different
colours
39.4 mm (1.55")
33 mm (1.3")
5
6
7
9
38 mm (1.5")
53 mm (2.09")
GAT Access 6100 F
Data carrier
Control elements:
Host interface:
Signal inputs:
Signal outputs:
Connection terminals:
Housing material:
Permitted ambient temperature: -10 to +55°C
Storage temperature:
Relative humidity:
Protection type:
Protection class:
Weight:
Environment class
based on VDS 2110:
Certifications of the GAT FR 055
finger scanner:
1. 4-segment LED display
2. Monochrome display (LCD)
3. Function keys
4. Illuminated, round scan field
5. Device back part
6. Device upper part
7. Fingerprint reader GAT FR 055 (optional)
8. Fingerprint sensor of the GAT FR 055
9. Weather protection cover (optional)
- 4 function keys
- RFID reader
Ethernet 10/100 MBit/s
1 x optocoupler (configurable)
- Input voltage: 0 to 30 VDC
U
< 2 VDC, U
> 6 VDC
Low
High
- Input current: 4.5 mA
1 x relay (configurable NO/NC)
- Switching voltage: max. 30 VAC/DC
- Continuous current: max. 2 A
- Switching power: max. 60 VA
0.5 to 1.5 mm
2
- GAT Access 6100 F: plastic
- GAT FR 055: plastic
-20 to +70°C
20 to 80%, non-condensing
IP 54
III
0.2 kg
II (conditions in indoor areas)
CE and FCC15
www.gantner.com