Gantner GAT Access 6100 F 사용자 설명서 - 페이지 2

{카테고리_이름} Gantner GAT Access 6100 F에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gantner GAT Access 6100 F 4 페이지. Access control terminal with biometry

페이지 인쇄

Technical data

Nominal voltage:

Permitted input voltage:

Aver. power consumption:

Data storage:

Internal clock:

Reader type:

Frequency reading field:

GAT FR 055 sensor:

Display elements:

Dimensions

93 mm (3.66")

Typical application

Power supply

Network

Turnstile

Valid as from July 31

2013 • Technical data subject to modifications without notice!

DB_GAT-ACCESS6100F--BIO-EN_11.indd • PartNo.: 243526

12/24 VDC (SELV - safety extra-low

voltage)

10 to 28 VDC

- Full operation sensor in: 4.5 W

- Full operation sensor out: 3.5 W

Internal EEPROM memory for

configuration and booking memory,

data preservation min. 10 years

Data preservation approx. 12 h

(Gold-Cap)

MIFARE

Standard

13.56 MHz

- Scanner type: optical sensor,

500 dpi @ 8-bit per pixel,

active area: 13 x 20 mm

- Verification time: < 0.8 sec.

- Identification time: < 1 sec.

- False acceptance rate 0.01%

(recommended), adjustable over wide

range

- Full graphical monochrome display

(LCD) with white LED background

lighting, resolution 128 x 64 pixels,

visible area 50 x 25 mm

- RFID reader (illuminated)

- Acoustic signal

- 4-segment LED display with different

colours

39.4 mm (1.55")

33 mm (1.3")

38 mm (1.5")

53 mm (2.09")

GAT Access 6100 F

Data carrier

Control elements:

Host interface:

Signal inputs:

Signal outputs:

Connection terminals:

Housing material:

Permitted ambient temperature: -10 to +55°C

Storage temperature:

Relative humidity:

Protection type:

Protection class:

Weight:

Environment class

based on VDS 2110:

Certifications of the GAT FR 055

finger scanner:

1. 4-segment LED display

2. Monochrome display (LCD)

3. Function keys

4. Illuminated, round scan field

5. Device back part

6. Device upper part

7. Fingerprint reader GAT FR 055 (optional)

8. Fingerprint sensor of the GAT FR 055

9. Weather protection cover (optional)

- 4 function keys

- RFID reader

Ethernet 10/100 MBit/s

1 x optocoupler (configurable)

- Input voltage: 0 to 30 VDC

< 2 VDC, U

> 6 VDC

Low

High

- Input current: 4.5 mA

1 x relay (configurable NO/NC)

- Switching voltage: max. 30 VAC/DC

- Continuous current: max. 2 A

- Switching power: max. 60 VA

0.5 to 1.5 mm

- GAT Access 6100 F: plastic

- GAT FR 055: plastic

-20 to +70°C

20 to 80%, non-condensing

IP 54

III

0.2 kg

II (conditions in indoor areas)

CE and FCC15