HIKVISION TurboHD H0T Series Kullanıcı Kılavuzu - Sayfa 10

Güvenlik Kamerası HIKVISION TurboHD H0T Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION TurboHD H0T Series 15 sayfaları. Turbo hd bullet & dome camera
Ayrıca HIKVISION TurboHD H0T Series için: Kullanıcı Kılavuzu (17 sayfalar), Kullanıcı Kılavuzu (16 sayfalar), Kullanıcı Kılavuzu (17 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (15 sayfalar), Kullanıcı Kılavuzu (17 sayfalar)

4. Drill the screw holes and cable hole (optional) on

the ceiling according to the drill template.

Note:

Cable hole is required when adopting ceiling outlet

to route the cable.

5. Route the cables through the cable hole (optional),

or the side opening.

6. Attach the mounting base to the ceiling and secure

it with PA4 × 25 screws.

Figure 2-15 Attach the Mounting Base to the Ceiling

7. Connect the corresponding cables, such as power

cord, and video cable.

8. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure

below.

1). Hold the camera body to adjust the pan position

[0° to 350°].

2). Move the camera body up and down to adjust

the tilt position [0° to 70°].

3). Rotate the camera body to adjust the rotation

position [0° to 350°].

9. Put the black liner and bubble back to finish the

installation.

Figure 2-17 Put the Black Liner and the Bubble Back

Figure 2-14 Drill Template

Figure 2-16 3-Axis Adjustment