IKEA FINPUTSAD 700 Manuel - Sayfa 10
Bulaşık Makinesi IKEA FINPUTSAD 700 için çevrimiçi göz atın veya pdf Manuel indirin. IKEA FINPUTSAD 700 20 sayfaları. Integrated
Sayfayı Yazdır
1. CHECK WATER CONNECTION
Check that the dishwasher is connected to the water supply
and that the tap is open.
ENGLISH
2. SWITCH ON THE DISHWASHER
Open the door and press the ON/OFF button.
3.
LOAD THE RACKS (see LOADING THE RACKS)
Daily Use
4.
FILLING THE DETERGENT DISPENSER
(see PROGRAMS TABLE).
1. Check water connection
5.
CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE
Check that the dishwasher is connected to the water supply
Select the most appropriate program in accordance with the
and that the tap is open.
type of crockery and its soiling level (see PROGRAMS
2. Switch on the dishwasher
DESCRIPTION) by pressing the
Open the door and press the ON/OFF button.
Select the desired options (see OPTIONS AND FUNCTIONS).
3. Load the racks (see LOADING THE RACKS)
4. Filling the detergent dispenser
6.
START
(see PROGRAMS TABLE).
Start the wash cycle by pressing START/Pause button (led
5. Choose the program and customise the cycle
is lit) and closing the door within 4 sec. When the program
Select the most appropriate program in accordance with
starts you hear a single beep. If the door was not closed within
the type of crockery and its soiling level (see PROGRAMS
4sec., the alarm sound will be played. In this case, open the
DESCRIPTION) by pressing the button.
door, press START/Pause button and close the door again
Select the desired options (see FUNCTIONS).
6. Start
within 4 sec.
Start the wash cycle by pressing START/Pause button (led
7.
END OF WASH CYCLE
is lit) and closing the door within 4 sec. When the program
The end of the wash cycle is indicated by beeps and by the
starts you hear a single beep. If the door was not closed
flashing of the wash cycle number on the display. Open the
within 4sec., the alarm sound will be played. In this case,
door and switch off the appliance by pressing the ON/OFF
open the door, press START/Pause button and close the door
again within 4 sec.
button.
7. End of wash cycle
Wait for a few minutes before removing the crockery - to avoid
The end of the wash cycle is indicated by beeps and by the
burns. Unload the racks, beginning with the lower one.
flashing of the wash cycle number on the display. Open the
door and switch off the appliance by pressing the ON/OFF
OPTIONS AND FUNCTIONS
button.
Functions
Wait for a few minutes before removing the crockery - to
avoid burns. Unload the racks, beginning with the lower one.
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
1. ECO - Normally soiled crockery. Standard program, the most efficient in terms of its combined energy and water
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
consumption.
Functions
OPTIONS AND FUNCTIONS
and beeps will sound. The option will not be enabled.
2. NORMAL - Mixed soil. For normally soiled dishes with dried food residues.
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
FLEXIBLE WASH
FLEXI WASH
for delicate items).
If there are not many dishes to be washed, a half
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
If there are not many dishes to be washed, a half loading
loading may be used in order to save water, electricity
and beeps will sound. The option will not be enabled.
4. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
may be used in order to save water, electricity and
and detergent.
5. FAST - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning performance in shorter time.
FLEXI WASH
detergent.
Select the program and then press the FLEXIBLE
If there are not many dishes to be washed, a half loading
WASH button: the symbol of the chosen rack will
Select the program and then press the FLEXI WASH button:
6. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform
may be used in order to save water, electricity and
appear on the display.
the symbol of the chosen rack will appear on the display.
maintenance of the dishwasher.
detergent.
By default the appliance washes dishes in all racks.
Select the program and then press the FLEXI WASH button:
By default the appliance washes dishes in all racks.
7. SELF- CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance
To wash only the specific rack, press this button
the symbol of the chosen rack will appear on the display.
To wash only the specific rack, press this button repeatedly:
using hot water.
By default the appliance washes dishes in all racks.
repeatedly:
To wash only the specific rack, press this button repeatedly:
shown on the display (only lower rack)
shown on the display (only lower rack)
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (only upper rack)
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
shown on the display (only upper rack)
OPTIONS AND FUNCTIONS
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED � � � �rapidly 3 times
shown on the display (only cutlery rack)
shown on the display (only cutlery rack)
shown on the display (only cutlery rack)
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
and beeps will sound. The option will not be enabled.
shown on the display (option is OFF and the appliance
ENGLISH
shown on the display (option is OFF and the appliance will
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
will wash dishes in all racks).
wash dishes in all racks).
and beeps will sound. The option will not be enabled.
HALF LOAD
shown on the display (option is OFF and the appliance will
Remember to load the upper or lower rack only, and to
wash dishes in all racks).
reduce the amount of detergent accordingly.
Remember to load the upper or lower rack only, and to reduce
If there are not many dishes to be washed, a half load
If upper rack is removed, please apply detergent
the amount of detergent accordingly. If upper rack is removed,
Remember to load the upper or lower rack only, and to
cycle may be used in order to save water, electricity and
directly to tub instead of detergent dispenser.
please apply detergent directly to tub instead of detergent
reduce the amount of detergent accordingly.
detergent. Select the program and press the HALF LOAD
dispenser.
If upper rack is removed, please apply detergent
button: the indicator light will light up. Press the HALF
DELAY
DELAY
DELAY
directly to tub instead of detergent dispenser.
LOAD button to deselect this option.
The start time of the program may be delayed for a period
The start time of the program may be delayed for a
of time between 1 and 12 hours.
The start time of the program may be delayed for a period
Remember to halve the amount of detergent.
1. Press the DELAY button: the corresponding «h» symbol
period of time between 1 and 12 hours.
of time between 1 and 12 hours.
appears on the display; each time you press the button,
DELAY
1. Press the DELAY button: the corresponding «h»
the time (1h, 2h, etc. up to max. 12h) from the start of
1. Press the DELAY button: the corresponding «h» symbol
symbol appears on the display; each time you press
The start time of the program may be delayed for a period
the selected wash cycle will be increased.
appears on the display; each time you press the button,
the button, the time (1h, 2h, etc. up to max. 12h) from
2. Select the wash program, press the START/PAUSE
of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer
the start of the selected wash cycle will be increased.
the time (1h, 2h, etc. up to max. 12h) from the start of
1. Press the DELAY button: the corresponding «h» symbol
will begin counting down.
2. Select the wash program, press the START/PAUSE
the selected wash cycle will be increased.
3. Once this time has elapsed, the indicator light «h»
appears on the display; each time you press the button,
button and within 4 seconds close the door: the timer
2. Select the wash program, press the START/PAUSE
switches off and the wash cycle begins.
the time (1h, 2h, etc. up to max. 12h) from the start of
will begin counting down.
To adjust the delay time and select a shorter period of time,
button and within 4 seconds close the door: the timer
the selected wash cycle will be increased.
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
will begin counting down.
repeatedly until the selected delayed start indicator light
2. Select the wash program, press the START/PAUSE
switches off and the wash cycle begins.
«h» switches off.
3. Once this time has elapsed, the indicator light «h»
To adjust the delay time and select a shorter period
button and within 4 seconds close the door: the timer
The DELAY function cannot be set once a wash cycle
switches off and the wash cycle begins.
of time, press the DELAY button. To cancel it, press
will begin counting down.
has been started.
To adjust the delay time and select a shorter period of time,
the button repeatedly until the selected delayed start
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
indicator light «h» switches off.
SHORT TIME
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
This option can be used to reduce the duration of the main
To adjust the delay time and select a shorter period of time,
«h» switches off.
programs while maintaining the same washing and drying
press the DELAY button. To cancel it, press the button
performance levels.
To adjust the delay time and select a shorter period of time,
The DELAY function cannot be set once a wash cycle
repeatedly until the selected delayed start indicator light
After selecting the program, press the SHORT TIME button
press the DELAY button. To cancel it, press the button
has been started.
and the indicator light will switch on. To deselect the option,
«h» switches off.
repeatedly until the selected delayed start indicator light
press the same button again.
button.
FLEXI WASH
If there are not many dishes to be washed, a half loading
may be used in order to save water, electricity and
detergent.
Select the program and then press the FLEXI WASH button:
the symbol of the chosen rack will appear on the display.
By default the appliance washes dishes in all racks.
To wash only the specific rack, press this button repeatedly:
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (only cutlery rack)
shown on the display (option is OFF and the appliance will
NaturalDry
wash dishes in all racks).
NaturalDry is a convection drying system which automatically
Remember to load the upper or lower rack only, and to
opens the door during/after drying phase to ensure exceptional
reduce the amount of detergent accordingly.
drying performance every day. Door opens at the temperature
If upper rack is removed, please apply detergent
that is safe to your kitchen furniture, thus door will not be opened
directly to tub instead of detergent dispenser.
when the option of SHORT TIME is on.
As additional steam protection, special designed protection foil is
added together with the dishwasher. To see how to mount protec-
DELAY
tion foil please refer to (INSTALLATION GUIDE).
The start time of the program may be delayed for a period
NaturalDry functionality could be disabled by the user as follows:
of time between 1 and 12 hours.
1. Go to the Dishwasher software menu pressing and holding
1. Press the DELAY button: the corresponding «h» symbol
button (6 sec).
appears on the display; each time you press the button,
2. You are currently in Light Control Menu (please refer to
the time (1h, 2h, etc. up to max. 12h) from the start of
OPERATION INDICATOR description), if you don't want to
the selected wash cycle will be increased.
change anything please press and hold
2. Select the wash program, press the START/PAUSE
the two letters appears on the display)
button and within 4 seconds close the door: the timer
3. You switched to NaturalDry Control Menu, you could change
will begin counting down.
Select the program and then press the FLEXI WASH button:
may be used in order to save water, electricity and
the symbol of the chosen rack will appear on the display.
detergent.
The machine will switch off automatically during certain
By default the appliance washes dishes in all racks.
Select the program and then press the FLEXI WASH button:
extended periods of inactivity, in order to minimise electri-
To wash only the specific rack, press this button repeatedly:
the symbol of the chosen rack will appear on the display.
city consumption. If the crockery is only lightly soiled or
By default the appliance washes dishes in all racks.
shown on the display (only lower rack)
if it has been rinsed with water before being placed in the
To wash only the specific rack, press this button repeatedly:
dishwasher, reduce the amount of detergent used accordingly.
shown on the display (only lower rack)
shown on the display (only upper rack)
MODIFYING A RUNNING PROGRAM
shown on the display (only upper rack)
If a wrong program was selected, it is possible to change it, pro-
shown on the display (only cutlery rack)
vided that it has only just begun: open the door, press and hold
The machine will switch off automatically during certain
the ON/OFF button, the machine will switch off.
shown on the display (only cutlery rack)
extended periods of inactivity, in order to minimise
shown on the display (option is OFF and the appliance will
Switch the machine back on using the ON/OFF button and select
electricity consumption. If the crockery is only lightly soiled
wash dishes in all racks).
the new wash cycle and any desired options; Start the wash cycle
or if it has been rinsed with water before being placed in the
shown on the display (option is OFF and the appliance will
Remember to load the upper or lower rack only, and to
by pressing START/Pause button and closing the door within 4 sec.
dishwasher, reduce the amount of detergent used
wash dishes in all racks).
reduce the amount of detergent accordingly.
accordingly.
If upper rack is removed, please apply detergent
Remember to load the upper or lower rack only, and to
ADDING EXTRA CROCKERY
Modifying a running program
directly to tub instead of detergent dispenser.
reduce the amount of detergent accordingly.
Without switching off the machine, open the door (START/Pause
If a wrong program was selected, it is possible to change it,
If upper rack is removed, please apply detergent
led starts blinking) (be ware of HOT steam!) and place the
provided that it has only just begun: open the door, press and
directly to tub instead of detergent dispenser.
DELAY
crockery inside the dishwasher. Press the START/Pause button
hold the ON/OFF button, the machine will switch off.
and close the door within 4 sec., the cycle will resume from the
Switch the machine back on using the ON/OFF button and select
The start time of the program may be delayed for a period
the new wash cycle and any desired options; Start the wash
DELAY
point at which it was interrupted.
of time between 1 and 12 hours.
cycle by pressing START/Pause button and closing the door
1. Press the DELAY button: the corresponding «h» symbol
The start time of the program may be delayed for a period
within 4 sec.
ACCIDENTAL INTERRUPTIONS
appears on the display; each time you press the button,
of time between 1 and 12 hours.
the time (1h, 2h, etc. up to max. 12h) from the start of
1. Press the DELAY button: the corresponding «h» symbol
If the door is opened during the wash cycle, or if there is a power
Adding extra crockery
appears on the display; each time you press the button,
the selected wash cycle will be increased.
cut, the cycle stops. Press the START/Pause button and close
Without switching off the machine, open the door (START/
2. Select the wash program, press the START/PAUSE
Pause led starts blinking) (be ware of HOT steam!) and place the
the time (1h, 2h, etc. up to max. 12h) from the start of
the door within 4 sec., the cycle will resume from the point at
crockery inside the dishwasher. Press the START/Pause button
button and within 4 seconds close the door: the timer
the selected wash cycle will be increased.
which it was interrupted.
and close the door within 4 sec., the cycle will resume from the
will begin counting down.
2. Select the wash program, press the START/PAUSE
point at which it was interrupted.
3. Once this time has elapsed, the indicator light «h»
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
will begin counting down.
Accidental interruptions
To adjust the delay time and select a shorter period of time,
3. Once this time has elapsed, the indicator light «h»
If the door is opened during the wash cycle, or if there is a
press the DELAY button. To cancel it, press the button
switches off and the wash cycle begins.
power cut, the cycle stops. Press the START/Pause button and
repeatedly until the selected delayed start indicator light
To adjust the delay time and select a shorter period of time,
close the door within 4 sec., the cycle will resume from the point
«h» switches off.
at which it was interrupted.
press the DELAY button. To cancel it, press the button
repeatedly until the selected delayed start indicator light
The DELAY function cannot be set once a wash cycle
«h» switches off.
has been started.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash
has been started.
TABLET (Tab)
SHORT TIME
cycle has been started.
This setting allows you to optimize the performance of
This option can be used to reduce the duration of the main
SHORT TIME
the program according to the type of detergent used.
SHORT TIME
programs while maintaining the same washing and drying
This option can be used to reduce the duration of the
TABLET (Tab)
Press the START/PAUSE button for 3 seconds (the
performance levels.
main programs while maintaining the same washing
This option can be used to reduce the duration of the main
This setting allows you to optimize the performance of
corresponding symbol will light up) if you use combined
and drying performance levels. After selecting the
After selecting the program, press the SHORT TIME button
programs while maintaining the same washing and drying
the program according to the type of detergent used.
detergents in tablet form (rinse aid, salt and detergent in
program, press the SHORT TIME button and the
Press the START/PAUSE button for 3 seconds (the
and the indicator light will switch on. To deselect the option,
performance levels.
corresponding symbol will light up) if you use combined
indicator light will switch on. To deselect the option,
1 dose).
After selecting the program, press the SHORT TIME button
press the same button again.
detergents in tablet form (rinse aid, salt and detergent in
press the same button again.
If you use powder or liquid detergent, this option
and the indicator light will switch on. To deselect the option,
1 dose).
should be off.
EXTRA DRY
If you use powder or liquid detergent, this option
press the same button again.
EXTRA DRY
should be off.
To improve the drying of the dishes, after selecting
To improve the drying of the dishes, after selecting the
the program, press the EXTRA DRY button and the
EXTRA DRY
program, press the EXTRA DRY button and the indicator
OPERATION INDICATOR
indicator light comes on. A higher temperature
OPERATION INDICATOR
during the final rinse and an extended drying phase
light comes on.
A LED light projected on the floor indicates that the
To improve the drying of the dishes, after selecting the
A LED light projected on the floor indicates that the
dishwasher is working. One of the following operating
allow for improving drying. To deselect the option,
A higher temperature during the final rinse and an extended
program, press the EXTRA DRY button and the indicator
dishwasher is working. One of the following operating
modes can be selected:
press the same button again. The EXTRA DRY option
drying phase allow for improving drying. To deselect the
light comes on.
a) Disabled function.
modes can be selected:
results in the lengthening of the wash cycle.
b) When the cycle starts the light goes on for few seconds,
option, press the same button again. The EXTRA DRY
A higher temperature during the final rinse and an extended
a) Disabled function.
stays off during the cycle and flashes at the end of the
TABLET (Tab)
TABLET (Tab)
option results in the lengthening of the wash cycle.
drying phase allow for improving drying. To deselect the
b) When the cycle starts the light goes on for few seconds,
cycle.
This setting allows you to optimize the performance
TABLET (Tab)
option, press the same button again. The EXTRA DRY
This setting allows you to optimize the performance of
c) The light stays on during the cycle and flashes at the
stays off during the cycle and flashes at the end of the
of the program according to the type of detergent
This setting allows you to optimize the performance of
end of the cycle (default mode).
option results in the lengthening of the wash cycle.
the program according to the type of detergent used.
cycle.
the program according to the type of detergent used.
used. Press the START/PAUSE button for 3 seconds
If the delayed start was set, the light goes on either for the
Press the START/PAUSE button for 3 seconds (the
Press the START/PAUSE button for 3 seconds (the
c) The light stays on during the cycle and flashes at the
first few seconds or the entire duration of the countdown,
(the corresponding symbol will light up) if you use
corresponding symbol will light up) if you use combined
based on whether mode b) or c) was set.
corresponding symbol will light up) if you use combined
end of the cycle (default mode).
combined detergents in tablet form (rinse aid, salt
detergents in tablet form (rinse aid, salt and detergent in
The light goes off every time the door is opened. To select
detergents in tablet form (rinse aid, salt and detergent in
1 dose).
and detergent in 1 dose).
If the delayed start was set, the light goes on either for the
the mode you prefer, switch on the machine, hold down
If you use powder or liquid detergent, this option
1 dose).
If you use powder or liquid detergent, this option
button P until one of the three letters appears on the display,
first few seconds or the entire duration of the countdown,
should be off.
press button P until you reach the desired letter (or mode),
should be off.
NaturalDry
If you use powder or liquid detergent, this option
based on whether mode b) or c) was set.
hold down button P to confirm the selection.
should be off.
OPERATION INDICATOR
The light goes off every time the door is opened. To select
Note: If NaturalDry is active and it opens the door, then
Door opening system NaturalDry is a convection drying system
OPERATION INDICATOR
A LED light projected on the floor indicates that
Operation Indicator will not flash at the end of cycle.
the mode you prefer, switch on the machine, hold down
A LED light projected on the floor indicates that the
which automatically opens the door during/after drying phase to
the dishwasher is working. One of the following
dishwasher is working. One of the following operating
button P until one of the three letters appears on the display,
ensure exceptional drying performance every day. Door opens at
modes can be selected:
operating modes can be selected:
press button P until you reach the desired letter (or mode),
the temperature that is safe to your kitchen furniture.
a) Disabled function.
a) Disabled function.
b) When the cycle starts the light goes on for few seconds,
hold down button P to confirm the selection.
As additional steam protection, special designed protection foil is
b) When the cycle starts the light goes on for a few
stays off during the cycle and flashes at the end of the
added together with the dishwasher. To see how to mount protec-
Note: If NaturalDry is active and it opens the door, then
cycle.
seconds, stays off during the cycle and flashes at the
c) The light stays on during the cycle and flashes at the
tion foil please refer to (INSTALLATION GUIDE).
Operation Indicator will not flash at the end of cycle.
end of the cycle.
end of the cycle (default mode).
NaturalDry functionality could be disabled by the user as follows:
c) The light stays on during the cycle and flashes at
If the delayed start was set, the light goes on either for the
the end of the cycle (default mode).
1. Go to the Dishwasher software menu pressing and holding
first few seconds or the entire duration of the countdown,
based on whether mode b) or c) was set.
If the delayed start was set, the light goes on either
button (6 sec).
The light goes off every time the door is opened. To select
NaturalDry
for the first few seconds or the entire duration of the
2. You switched to NaturalDry Control Menu, you could change
the mode you prefer, switch on the machine, hold down
countdown, based on whether mode b) or c) was set.
button P until one of the three letters appears on the display,
NaturalDry is a convection drying system which automatically
status of NaturalDry functionality by pressing
press button P until you reach the desired letter (or mode),
The light goes off every time the door is opened.
E
1. Go to the Dishwasher software menu pressing and holding
opens the door during/after drying phase to ensure exceptional
– enabled
hold down button P to confirm the selection.
button (6 sec).
Note: If NaturalDry is active and it opens the door, then
drying performance every day. Door opens at the temperature
To confirm the change and exit from the Control Menu please
Operation Indicator will not flash at the end of cycle.
2. You switched to NaturalDry Control Menu, you could change
that is safe to your kitchen furniture, thus door will not be opened
press and hold
status of NaturalDry functionality by pressing
when the option of SHORT TIME is on.
EN
d
– disabled
button (until one of
button (3 sec).
10
EN
EN
9
11
11
button:
button:
N
N
Na
op
dr
Na
th
op
w
dry
As
tha
ad
wh
tio
As
N
ad
1.
tio
Na
2.
1. G
b
2. Y
O
3.
c
t
3. Y
To
s
pr
E
To
pre