IKEA RENGJORD Manuel - Sayfa 7

Bulaşık Makinesi IKEA RENGJORD için çevrimiçi göz atın veya pdf Manuel indirin. IKEA RENGJORD 23 sayfaları.
Ayrıca IKEA RENGJORD için: Montaj Talimatları Kılavuzu (40 sayfalar)

Sayfayı Yazdır

Heat Dry

The HEAT DRY option in combination with

rinse aid will enhance drying performance.

HEAT DRY option is available on all cycles.

Air Dry

The AIR DRY option will reduce temperature

in the hot rinse of the selected wash cycle.

This option will slightly decrease energy

usage but will increase the likelihood that

dishware will not be dry.

Child Lock Controls

To prevent children from accidentally

changing the dishwasher cycle or starting

the dishwasher, lock the dishwasher controls

by pressing the DELAY START button until

the status window displays "loc". To unlock

the controls, press the DELAY START button

until "loc" is no longer displayed in the status

window.

To Cancel a Cycle and Delay Start

Both running cycle and delay countdown

can be cancelled at any time.

Open the dishwasher door and press

the START button until you hear a tone.

The running cycle or delay countdown is

cancelled.

If desired, a new cycle can now be selected,

by pressing START button and closing the

door immediately, the new cycle will begin.

To Cancel a Setting

If you have selected your cycle and options

and decide to cancel, by pressing the START

button, the unit will go into a stand-by

mode, which all LEDs will go out.

CONTROLS & SETTINGS

Delay Start

The DELAY START option allows you to

automatically delay starting your dishwasher

from 1-24 hours.

Select your desired cycle and options, then

press the DELAY START button until the

desired delay time displays in the status

window. The LEDs of selected cycle and

options are illuminated. The status window

displays the delay time and then displays

'Press Start'.

To start the delay countdown, press START

button and close door immediately.

The status window displays 'Close' after the

START button is pressed.

A tone will sound indicating that the

countdown has started after the door is

closed. The selected cycle starts when the

countdown is completed.

Opening the door during cycle

If door is opened while a cycle is running or

delay is counting down, the dishwasher will

stop running.

The LEDs of selected cycle and options are

illuminated, the status window displays

the remaining cycle time or delay time and

displays 'Press Start'.

To resume, press START button and close

the dishwasher door immediately. The

status window displays 'Close' after the

START button is pressed.

A tone will sound indicating that the

dishwasher will begin running from the

point of interruption after the door is closed.

If the dishwasher door is kept open for too

long, or the door is closed without pressing

START button, the running cycle or delay

countdown will be cancelled.

Status Indicator Lights

The CLEAN light will remain on after door is

opened.

When the SANITIZE option is selected and

the criteria is met, the Sanitized indicator

will display and remain on after the door

is opened. If the sanitization criteria is not

achieved, the indicator will not display. This

can happen if the cycle is interrupted or if

the sanitization temperature could not be

reached due to incoming water temperature

significantly below 120°F.