CORNING ONE HEU Hızlı Kurulum Sayfası

Ölçüm Cihazları CORNING ONE HEU için çevrimiçi göz atın veya pdf Hızlı Kurulum Sayfası indirin. CORNING ONE HEU 12 sayfaları. Headend unit

This document describes the installation procedure for the Corning® optical network evolution (ONE™) headend unit (HEU)

and relevant modules.

REQUIRED KITS

The following items are required for installing the ONE™ HEU. If any of the listed items are missing, contact your

Corning representative.

HEU Kit

Headend Unit Chassis (with blank panels on RIM and

one PSM slots) – includes factory-installed FAM in chassis

rear

FAM – single unit hosting four fans

(factory installed in chassis rear)

RJ45/RJ45 Communication Cable L = 2 m-2.15 m

(P/N 705900003) – HCM management cable

RIMe Kit (1-12 according to order)

Extended Radio Interface Module (service specific)

Table 1. Kits Required for HEU Installation

Corning Optical Communications

Headend Unit (HEU)

Quick Installation Sheet

CMA-267-AEN

GENERAL INFORMATION

1. The HEU chassis is supplied empty and only includes the factory-

assembled fan module (FAM). All other modules are ordered separately

and must be installed.

2. Each HEU includes 14 slots — two for RF expander modules (RIXs) and

12 for extended radio interface modules (RIMes).

Qty

Item

Quick Installation Sheet | CMA-267-AEN | Page 1