BERNSTEIN G30013A Montaj Talimatları Kılavuzu - Sayfa 13
Sıhhi Tesisat Ürünleri BERNSTEIN G30013A için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. BERNSTEIN G30013A 16 sayfaları. Support frame
Sayfayı Yazdır
SUPPORT FRAME G30013A
Loosen the cross bar support height adjustment bolts.
Raise the cross bar support up as high as possible (under
the waste outlet elbow) and retighten both bolts.
This will provide extra support for the bidet.
Connect the hot and cold pipework to the inlet elbows (Ø
½"), screw the blanking plugs into the outlets.
BSP female threaded outlets may need extending
(depending on tile thickness etc), using male nipples.
The hot and cold inlet elbows can be rotated to suit your
pipework. It is essential that isolation valves are fitted in the
void at this point.
Loosen the hot and cold inlet elbows (using the nut at the
rear).
Set to the required distance apart to allow easy connection
of the mixer supplies within the shroud of the bidet and
retighten.
Build the partition wall, making the holes for the bolts and
pipes.
If required, tile the surface or apply the finish now.
5