Makita BCS550 Kullanım Kılavuzu - Sayfa 4

Elektrikli Alet Makita BCS550 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita BCS550 13 sayfaları. Cordless metal cutter 136mm (5-3/8")
Ayrıca Makita BCS550 için: Parça Dağılımı (3 sayfalar), Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu (10 sayfalar), Teknik Bilgiler (13 sayfalar)

Sayfayı Yazdır

18. Do not use the power tool if the switch does

not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous

and must be repaired.

19. Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

20. Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

21. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool's operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

22. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

23. Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the

power tool for operations different from those

intended could result in a hazardous situation.

Battery tool use and care

24. Recharge only with the charger specified by

the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of fire

when used with another battery pack.

25. Use

power

tools

designated battery packs. Use of any other

battery packs may create a risk of injury and fire.

26. When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from one

terminal

another. Shorting the battery

terminals together may cause burns or a fire.

27. Under abusive conditions, liquid may be

ejected from the battery; avoid contact. If

contact accidentally occurs, flush with water.

If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery

may cause irritation or burns.

Service

28. Have your power tool serviced by a qualified

repair

person

replacement parts. This will ensure that the

safety of the power tool is maintained.

only

with

specifically

using

only

identical

29. Follow

instruction

changing accessories.

30. Keep handles dry, clean and free from oil and

grease.

CORDLESS METAL CUTTER

SAFETY WARNINGS

Cutting procedures

DANGER: Keep hands away from cutting

area and the blade. Keep your second hand

on auxiliary handle, or motor housing. If both

hands are holding the tool, they cannot be cut by

blade.

Do not reach underneath the workpiece. The

guard cannot protect you from the blade below

the workpiece.

Adjust the cutting depth to the thickness of

the workpiece. Less than a full tooth of the blade

teeth should be visible below the workpiece.

Never hold piece being cut in your hands or

across your leg. Secure the workpiece to a

stable platform. It is important to support the

work properly to minimize body exposure, blade

binding, or loss of control.

Hold

power

surfaces only, when performing an operation

where the cutting tool may contact hidden

wiring. Contact with a "live" wire will also make

exposed metal parts of the power tool "live" and

could give the operator an electric shock.

When ripping, always use a rip fence or

straight edge guide. This improves the accuracy

of cut and reduces the chance of blade binding.

Always use blades with correct size and shape

(diamond versus round) of arbour holes. Blades

that do not match the mounting hardware of the

tool will run eccentrically, causing loss of control.

Never

use

washers or bolt. The blade washers and bolt

were specially designed for your tool, for optimum

performance and safety of operation.

Kickback causes and related warnings

−

Kickback is a sudden reaction to a pinched, bound

or misaligned blade, causing an uncontrolled tool to

lift up and out of the workpiece toward the operator.

−

When the blade is pinched or bound tightly by the kerf

closing down, the blade stalls and the motor reaction

drives the unit rapidly back toward the operator.

−

If the blade becomes twisted or misaligned in the

cut, the teeth at the back edge of the blade can dig

into the top surface of the workpiece causing the

blade to climb out of the kerf and jump back

toward the operator.

for

lubricating

tool

insulated

damaged

incorrect

and

GEB058-3

gripping

blade