HIKVISION DS-9000HFI-ST Hızlı Başlangıç Kılavuzu - Sayfa 11
DVR HIKVISION DS-9000HFI-ST için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. HIKVISION DS-9000HFI-ST 13 sayfaları. Hybrid dvr and nvr
Sayfayı Yazdır
HYBRID DVR/NVR/ANALOG
10. Adding IP Cameras
Adding IP Cameras
Directly on the Hybrid DVR and NVR's Menu:
1. Enter the Add/Remove Cameras menu by going to Main Menu > Cameras Setup > Cameras.
2. Select the IP Camera tab.
3. Click the Search button to automatically detect connected IP cameras on the network.
4. If the detected IP cameras and DVR are not on the same subnet, you can modify the camera's IP,
subnet and port settings by clicking on the
5. Input the camera's password in the password field. Click the Add button to add the IP camera to
the Added Cameras list. Please note the camera's status will show as disconnected initially.
Click the refresh button to obtain a connected status. You can also click the play icon to
verify a successful connection to the camera.
6. Once an IP camera has been added to the Added Cameras list, you may remove the camera by clicking
the Trashcan icon or view the camera by clicking the Play icon.
7. Go to Main Menu > Recording Configuration > Recording Quality to setup IP camera recording
resolution, frame rate, etc.
Using Internet Explorer
1. Connect to the DVR by typing the IP address in the address bar
2. Login to the DVR as above.
3. Click on Configuration > Camera Management > IP Camera
4. Enter the camera IP Address and other appropriate information on the right side of the screen.
5. Repeat to add more cameras.
next to camera's IP address.