HIKVISION DS-9600NI-H8 Kurulum Kılavuzu - Sayfa 12
DVR HIKVISION DS-9600NI-H8 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HIKVISION DS-9600NI-H8 14 sayfaları.
Installation Manual of DS-9600NI-H8
Steps:
1.
Enter BIOS interface when starting process by pressing F2 on keyboard.
2.
Enter Advance settings interface by pressing direction buttons and Enter button on keyboard.
Boot > Legacy > Normal Boot Menu > Advance
3.
Set the CD/DVD-ROM Drive as the first boot type.
4.3 Installing Operating System
Before you start:
If you use a SATA CD/DVD-ROM drive, connect it to the interface of eSATA.
If you use a USB CD/DVD-ROM drive, connect it to any of the USB interfaces.
If you use a SATA disk as the system disk, connect it to the eighth HDD slot, which is located at low-right corner after
opening the front panel. The Windows 7 OS, Windows 8 OS and Linux OS can be installed on the NVR directly.
Step:
Insert the Windows installation CD and install the operating system.
Figure 4. 6 Boot Configuration Interface
Figure 4. 7 Setting the Boot Type
8