Airgineers Micro Drone Talimatlar Kılavuzu - Sayfa 4

Dronlar Airgineers Micro Drone için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Airgineers Micro Drone 16 sayfaları.

Building the drone

Attaching the motors

STEP 1

Select the two Clockwise CW motors (Red and Blue wires). Place a motor

on top left and bottom right of the frame (as shown). Feed the motor cable

through the hole and out of theside, then slowly push the motor through the

hole as far as it will go. Repeat for the second motor.

STEP 3

STEP 2

Select the other two Counter-Clockwise CCW motors (Black and White wires)

and fit the motors in the two spare slots, as described in Step 1.

STEP 4

Turn the drone upside

down and plug the

motors into the

board. Take care to

connect each motor

to the connector

closest to that motor

(as shown).

Place an elastic band

around each of the

frame motor holders

and the cable to keep

the cable held tight

to the frame.

Airginners Manual version 1.0 2022